© TrynEx International 2013 (REV A) F508532
Introduction
Have a question or need assistance?
SnowEx Customer Care
1-800-SALTERS
or (248) 586-3500
Monday through Friday 8:00 AM to 4:30 PM EST
Fax: (248) 691-8378
E-mail: customercare@trynexfactory.com
Website: www.snowexproducts.com
This VBR-400 is designed to increase material ow on the SnowEx Super-Maxx 9800X when spreading low-ow materials such as moist salt
and sand-salt mix. This kit connects directly to the existing Control Module of the Spreader, integrating completely with the existing controls –
there is no need for additional switches.
CONTENTS
Installation Instructions
Installing the Vibrator ............................................................................................................................................................... 3 - 4
Wiring Installation .................................................................................................................................................................... 5 - 7
Parts Key ..................................................................................................................................................................................................... 8
Please read this Installation Guide carefully before installing. Pay particular attention to safety messages.
Refer to the Owner’s Manual of your Spreader for Operation, Maintenance and Troubleshooting information.
Remember, most accidents are preventable and caused by human error. Exercising of care and precautions
must be observed to prevent the possibility of injury to operator or others!
Before working with the spreader, secure all loose tting clothing and unrestrained hair.
Always wear safety glasses with side shields when servicing spreader. Failure to do this could result in serious
injury to the eyes.
Never weld or grind on equipment without having a re extinguisher available.
Park vehicle on level ground before servicing the spreader.
Follow all vehicle safety information.
Tools List
3/4” Wrench
Grinder
Spray Primer and Paint (optional)
Drill
3/8” Drill Bit
9/16” Wrench
9/16” Socket w/ Ratchet x2
Step Drill Bit [for 1-1/8 Hole]
5/16” Nut Runner
Flat Screwdriver (for prying)
1/2 Socket w/ Ratchet
7/16” Socket w/ Ratchet
3/8” Socket w/ Ratchet
Ratchet Extension
Eye Protection
Dielectric Grease
Tongue-and-Groove Pliers
(Channellocks).
(0 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels